Wheatstone IP88-3M Microphone pre-amplifier Blade

In stock
Brand: WheatstoneWheatstone


mic_blade3_front_back

The ip88-3m is an analogue input/output BLADE with microphone-level inputs. It has eight built-in microphone preamplifiers complete with pad, phase switch, and phantom power. It provides eight analogue line-level outputs as well. It also provides 12 channels of universal logic (GPIO). All signals are routable anywhere on the network.

ABOUT ALL I/O BLADE-3S:

I/O BLADEs are far more than mere access units connecting studios, elements and Wheatstone control surfaces in the WheatNet-IP Intelligent Network.

Yes, I/O BLADEs convert audio and logic inputs to data streams on the network and convert outgoing data streams to hardware outputs.

But these 1RU I/O units – which come in analogue, digital and analogue/digital I/O units - also have intelligence inside. Each I/O BLADE comes with a CPU and operating system so you can do amazing things with your audio network, starting with routable mixing, logic-follow-audio and a whole lot more. 

Each of these access units, or BLADEs, communicates at lightning speed across the network via Gigabit Ethernet interface, and includes logic control, utility mixers and a dedicated controller that gives it its own intelligence. Each BLADE holds the entire brain trust of the studio operation for exceptional redundancy and scalability. 

Every WheatNet-IP BLADE access unit is self-aware, and can reconfigure itself in an emergency. In fact, each BLADE in the network can recover settings for your entire studio operation!

More than a mere node, this BLADE has two eight-channel utility mixers for mixing, summing and controlling audio. With all that functionality built-in, this sleek unit could save you up to 50% in network hardware costs alone.

IP-88 M BLADE-3 FEATURES:

  • 8 microphone-level XLR inputs with 8 built-in mic preamps complete with pad, phase switch, and phantom power
  • 8 analogue line-level outputs
  • RJ45 connectors for audio (8 out)
  • One D-Sub connectors for analogue audio output

EVERY I/O BLADE-3 FEATURES:

  • CPU with OS and standalone operation
  • 24-bit A/D and D/A convertors
  • 1RU, no fans
  • AES67 compatible
  • One Gigabit Ethernet port
  • Two stereo 8x2 utility mixers
  • Stereo multiband processor
  • Embedded audio playback
  • Silence sensing can be applied to any outputs
  • 12 universal logic ports (GPIO) on 2 RJ-45 connectors
  • 128 software logic ports
  • Front panel headphone jack
  • Two colourful OLED displays on front

MIC BLADE I/O

  • Inputs         Electronic differential, >2KΩ (bridging) Optimum source impedance <200Ω
  • Outputs           <10Ω, 20Hz-20kHz  Optimum load impedance >600Ω

Connectors          

  • XLR-F, requires XLR-M cable connector (microphone inputs)
  • DB25 female, requires DB25 Male cable end connectors (analogue outputs)
  • RJ45, requires straight-wired RJ45 plugs (analogue outputs, logic ports, & gigabit Ethernet

Frequency response     ±0.5dB, 20Hz-20kHz, ref +4dBu

THD+n          0.02%, 20Hz-20kHz, ref +4dBu

Noise          -85dBu; -109dBr ref max level out

Reference level           -50dBu

Gain range                  +20 to +80dB, inputs; ±18db, outputs

Maximum input           -10dBu

Maximum output          +24dBu

A>D converter            ADC enhanced dual bit, 24 bit resolution

D>A converter            DAC 24bit Advanced ∑∆

LOGIC I/O

Connector       RJ45 (2), 12 channels

Voltage          +5VDC to GND,  +5VDC and GND provided

Current          100mA max source/sink

ETHERNET

Connectors   RJ45

Cable          CAT5E or CAT6

Audio transport          Gigabit Ethernet   1000BASE-T, used for all BLADE-to-BLADE audio traffic

Utility interface          100BASE-TX for future use

SYSTEM

Sample rate          44.1 or 48kHz, user selectable in software

Sync                    Internal or external, External sync input on any I/O digital BLADE

Reference level     0dBFS=+4dBu (+4dBu=1.23VRMS)

Latency                0.5mS, BLADE to switch to BLADE

PHYSICAL 

Dimensions         

19"/48.3cm wide, 1-3/4"/4.5cm high 

13-1/4"/33.7cm deep 

15-1/4"/38.7cm deep with connectors

Shipping weight          14lbs/6.4kg

Related Products

Results 1 - 6 of 6