Wheatstone IP88-3D Digital Input/Output Blade

In stock
Brand: WheatstoneWheatstone


digital_blade3_front_back7

The ip88-3d is an AES digital input/output BLADE. It handles input and output, each with eight stereo channels. It also provides 12 channels of universal logic (GPIO). All signals are routable anywhere on the network.

ABOUT ALL I/O BLADE-3S:

I/O BLADEs are far more than mere access units connecting studios, elements and Wheatstone control surfaces in the WheatNet-IP Intelligent Network.

Yes, I/O BLADEs convert audio and logic inputs to data streams on the network and convert outgoing data streams to hardware outputs.

But these 1RU I/O units – which come in analogue, digital and analogue/digital I/O units - also have intelligence inside. Each I/O BLADE comes with a CPU and operating system so you can do amazing things with your audio network, starting with routable mixing, logic-follow-audio and a whole lot more. 

Each of these access units, or BLADEs, communicates at lightning speed across the network via Gigabit Ethernet interface, and includes logic control, utility mixers and a dedicated controller that gives it its own intelligence. Each BLADE holds the entire brain trust of the studio operation for exceptional redundancy and scalability. 

Every WheatNet-IP BLADE access unit is self-aware, and can reconfigure itself in an emergency. In fact, each BLADE in the network can recover settings for your entire studio operation!

More than a mere node, this BLADE has two eight-channel utility mixers for mixing, summing and controlling audio. With all that functionality built-in, this sleek unit could save you up to 50% in network hardware costs alone.

IP-88 D BLADE-3 FEATURES:

  • 8 stereo channels, 16 mono channels, or any combination totaling 16 discrete channels (all AES digital).
  • RJ45 connectors for audio (8 in, 8 out)
  • Four D-Sub connectors for audio (2 in, 2 out) 

EVERY I/O BLADE-3 FEATURES:

  • CPU with OS and standalone operation
  • 24-bit A/D and D/A convertors
  • 1RU, no fans
  • AES67 compatible
  • One Gigabit Ethernet port
  • Two stereo 8x2 utility mixers
  • Stereo multiband processor
  • Embedded audio playback
  • Silence sensing can be applied to any outputs
  • 12 universal logic ports (GPIO) on 2 RJ-45 connectors
  • 128 software logic ports
  • Front panel headphone jack
  • Two colourful OLED displays on front

DIGITAL BLADE I/O

Inputs            Balanced 110Ω AES-3, S/PDIF compatible

Outputs          Balanced 110Ω AES-3 only

Connectors         

DB25 Female, requires DB25 Male cable end connectors

RJ45, requires straight-wired RJ45 plugs

Frequency response         Flat, 20Hz-20kHz, ref -20dBFS, +4dBu

THD+n                           0.0009%, 20Hz-20kHz, ref -20dBFS, +4dBu

Noise                            -141dBFS, ref max level out

Gain range                    ±18db, inputs and outputs

Maximum input              0dBFS

Maximum output            0dBFS

Sample rate converters   32-96kHz, 16-24bit, on all inputs

AES channel status         Standard implementation

LOGIC I/O

Connector       RJ45 (2), 12 channels

Voltage          +5VDC to GND,  +5VDC and GND provided

Current          100mA max source/sink

ETHERNET

Connectors   RJ45

Cable          CAT5E or CAT6

Audio transport          Gigabit Ethernet   1000BASE-T, used for all BLADE-to-BLADE audio traffic

Utility interface          100BASE-TX for future use

SYSTEM

Sample rate          44.1 or 48kHz, user selectable in software

Sync                    Internal or external, External sync input on any I/O digital BLADE

Reference level     0dBFS=+4dBu (+4dBu=1.23VRMS)

Latency                0.5mS, BLADE to switch to BLADE

PHYSICAL 

Dimensions         

19"/48.3cm wide, 1-3/4"/4.5cm high 

13-1/4"/33.7cm deep 

15-1/4"/38.7cm deep with connectors

Shipping weight          14lbs/6.4kg

Related Products

Results 1 - 6 of 6