Magic AC1 XIP IP and ISDN Audio Codec

In stock
Brand: AVTAVT


magic_ac1_xip_297172775
magic_ac1_xip_297172775remote_control_198517512magic_keypad_basic_206723033battery_pack_1898102439

The MAGIC AC1 XIP Audio Codec is equipped with an ISDN BRI, a LAN and an X.21 interface and supports the G.711 (3.1-kHz), G.722 (7-kHz) and ISO/ MPEG Layer 2 coding algorithms. ISO/MPEG Layer 3 (15-kHz), standard apt-X, enhanced apt-X und AAC-LD are optionally available.

From software version 3.000 upwards MAGIC AC1 XIP provides the so-called ISDN/SIP Auto Mode. Using this mode the system detects automatically via which line interface (ISDN or LAN) a call is received.

ISDN operating mode

The MAGIC AC1 XIP Audio Codec can use up to 2 ISDN B channels with a maximum data rate of 128-kbit/s for the transmission of a high quality Audio signal. The required inverse multiplexing procedure is also defined in the ITU-T J.52 standard. The inverse multiplexing procedure guarantees a minimum transmission delay. 
A remarkable feature is also the transmission of a command signal with 3.1-kHz or 7-kHz bandwidth in parallel to the transmission of the high quality Audio signal.

Due to the implemented Auto Dynamic Sync (ADS) functionality, the MAGIC AC1 XIP systems detect the parameters of the calling or the called codec for 1B and 2B ISDN connections and adapt to them automatically. ADS supports e.g. codecs from ORBAN (Musictaxi), CCS, TELOS as well as all 7-kHz and J.52 Codecs.

IP operating mode

Two transmission modes are available:

Leased Line Mode with RTP: Permanent connection after entering the IP address/the system name

Dial-up Mode with SIP: Dial-up connection according to EBU N/ACIP Standard

MAGIC AC1 XIP supports DHCP for a dynamic allocation of IP addresses as well as the DNS protocol, with which the allocated IP address is converted into a domain name. For each MAGIC AC1 XIP unit, a unique system name can be entered, under which the Audio Codec can be reached within the network. In this way, the user does not need to remember the IP address of the Audio Codec, which is allocated dynamically via DHCP. Additionally, the DNS Protocol ensures that the system is still available under the system name within the network, even if the IP address changes.

X.21 operating mode

In the X.21 operating mode the MAGIC AC1 XIP Audio Codec provides a coded Audio signal with data rates from 8-kbit/s to 384-kbit/s. All ISO/MPEG Layer 2/3 data rates are provided. After the Audio algorithm is selected the unit measures the X.21 clock and adapts the Audio Codec’s data rate to the X.21 line clock. PAD can be transmitted together with Audio data.

Operation

The system can be operated via the front keypad and display. Alternatively, a comfortable configuration and control is possible with the MAGIC DC7/AC1 Windows PC Software or the MAGIC DC7/AC1 LAN Windows PC Software. The LAN software allows simultaneous monitoring, configuration and control of up to 40 Audio Codecs within a network. Both Software Versions are included in the delivery.

With the "AES/EBU Interface" Option, the digital Audio interfaces of the system can be used. The AES/EBU licence can also be enabled for systems that are already delievered to the customer. We only need the serial number of the system to generate a password.

Please note: To use the AES/EBU option for the MAGIC POTS/ISDN Telephone Hybrids/Telephone Hybrid System, the system has to be equipped with the optional AES/EBU/Analogue Module.

MAGIC Keypads

MAGIC Keypad Basic

For operation without PC, the external MAGIC Keypad Basic is available. The user interface is similar to the 15 kHz ISDN Telephone. The MAGIC Keypad Basic supports all functions of the MAGIC Audio Codecs and is connected with the RS232 Control interface of the Codec.

MAGIC Keypad Advanced

Alternatively, the MAGIC Keypad Advanced can be used for operation of the Audio Codecs without a PC. With the MAGIC Keypad Advanced, the integrated Audio Mixer (Option) can also be controlled and configured., which is not possible with the MAGIC Keypad Basic. Like the MAGIC Keypad Basic, the Advanced Keypad is connected via the RS232 Control interface with the systems.

For the MAGIC TH1 Go Telephone Hybrids and the MAGIC TH2plus Telephone Hybrid as well as for the MAGIC DC7 XIP and MAGIC AC1 XIP Audio Codecs, a corresponding 19" Dual Mounting Kit is available with which two systems next to each other can be installed in one 19" rack.
In the standard delivery scope of above mentioned systems, 19" mounting brackets for installing one system in a 19" rack are already included.

The MAGIC Battery Pack is available for the MAGIC DC7 XIP and MAGIC AC1 XIP Audio Codecs. 
The lithium battery can be mounted on the bottom side of the units and forms a compact unit together with the system, which is perfect for mobile use because of its light weight. With a size of 193 x 24 x 135 mm and a battery life of 2 hours, the new battery offers - even during a power blackout - an uninterruptible operation. If the battery pack is connected to the external power supply of the system, the system is supplied with power and at the same time, the battery is charged during operation. The unit also has a charging control which is signalled by LEDs.

15-kHz Audio Codec with a delay of ca. 250 ms. ISO/MPEG Layer 3 is more efficient than ISO/MPEG Layer 2 and provides a better Audio quality at low bit rates. The algorithm is also implemented in many Audio Codecs.
In the new Audio over IP standard N/ACIP TECH3326 ISO/MPEG Layer 3 is only recommended. Interoperability for IP connections is guaranteed due to the standard.

* Each MAGIC AC1/AC1 XIP System provides ISO/MPEG Layer 2 or ISO/MPEG Layer 3 in the standard version (as required). The other algorithm, respectively, is available as optional Upgrade.

For MAGIC AC1, MAGIC AC1 XIP and MAGIC AC1 XIP RM two apt-X Upgrades are available. The systems support the standard apt-X and enhanced apt-X low delay coding algorithms.

Standard apt-X

15-kHz Audio Codec with a very low delay of less than 10 ms. The Codec, however, requires 128-kbit/s for a high-quality Mono Audio signal and 256-kbit/s for a Stereo signal. Via ISDN only a Mono signal with 15-kHz bandwidth can be transmitted. Furthermore, interoperability for ISDN connections between systems from different manufacturers is not guaranteed.
In the new Audio over IP standard N/ACIP TECH3326 apt-X is rated as only optional. Interoperability for IP connections is guaranteed due to the standard.
The licences are issued per channel per Encoder or Decoder, respectively.

Enhanced apt-X

Identical parameters as Standard apt-X, however with Audio quality further improved due to higher dynamic and even less delay.
The licences are issued per channel per Encoder or Decoder, respectively.

15-kHz Audio Codec with a low delay of ca. 50 ms. The Codec provides a very good quality at low bit rates, but it is not very widely-used in the available Audio Codecs. Furthermore, interoperability for ISDN connections between systems from different manufacturers is not guaranteed.
In the new Audio over IP standard N/ACIP TECH3326 AAC-LD is rated as only optional. Interoperability for IP connections is guaranteed due to the standard.

  • Complete remote system configuration
  • Remote system access via your PC - world-wide
  • Support less experienced users
  • Full access to the ISDN Monitor

For remote control you need only a PC with an ISDN interface card and the MAGIC DC7, MAGIC DC7 XIP/XIP RM, MAGIC AC1 or MAGIC AC1 XIP/XIP RM system software. Against unauthorised access a password protection can be activated or you can allow access only from certain service telephone numbers which can be stored in the system.

And if you cannot find a solution: with your permission our technical support can access to your system via this function.

With one Remote Control licence all systems of the same product type can be controlled by a PC locally and remotely. 
The licence key is stored in a USB dongle and therefore at least one free USB port on the PC must be available.

For the MAGIC DC7 XIP/XIP RM and MAGIC AC1 XIP/XIP RM Audio Codecs an automatic ISDN Backup Function is now optionally available.
If the main connection between two MAGIC Codecs drops out during an Audio transmission, the systems switch automatically to the ISDN interface and the codec which has been selected as „Master“ establishes an ISDN Backup connection with the parameters that have been configured in the software. The Backup Function provides many configuration settings with which the backup solution can be adapted to your requirements. You can select for example the time in milliseconds for which the main connection must drop out before the backup is activated. In this way, you can avoid that a backup is established because of very short disturbances. The maximum backup time as well as the time frame during which no errors may occur before the systems switch back to the main connection are configurable.
To make sure that the ISDN Backup connection is working properly, a scheduled or manually triggered backup test can be carried out via the software without interrupting the main connection.

ISDN Backup via external alram signal

If an existing primary path contribution (e.g. via satellite) is to be protected with an automatic ISDN Backup, MAGIC AC1 and MAGIC AC1 XIP can trigger the ISDN Backup via an external TTL alarm signal. As long as the alarm signal is pending, the backup path remains active. Via the configuration parameters all backup conditions can be adjusted to your requirements. For example, the maximum backup time and the time period during which the alarm signal is to be pending before the backup is triggered can be selected. Via the TTL or relay output an external Audio switch can be controlled.